Home | Company Info | Products | Articles | Contact Us | Search Our Site | Site Map
Displays | Temp. Sensors | Humidity Transmitters | Pressures Transmitters | Current Sensors
Interface Devices | Accessories

VAV Temperature Sensors

Product Description:

The ACI/VAV Series temperature transmitter is a system specific sensor that provides accurate temperature control.

The ACI/VAV converts a platinum RTD signal into a linear and proportional voltage output. Therefore, this signal should not be run over long distances since the lead wire resistance will affect the accuracy of the transmitter.

These units will be offered in Room, Room with Setpoint, Room with Override, Room with Setpoint and Override, Duct and Immersion configurations.

Only 40 to 90oF and 20 to 127oF spans will be offered. The indication sticker for the setpoint is Cool/Warm.

All ACI/VAV's come factory calibrated and are ready for installation. Custom configurations are available.

Product Specifications:
Input 2 wire Platinum 100 Ohm RTDTransmitter Accuracy +/- 0.5F
Output 3 wire, .109 to 3.046 VDCSensor Accuracy 0.12% @ 32F
Supply Voltage 7 to 35 VDCSetpoint Range 0 to 5VDC
Linearity +/- 0.05% of spanTransmitter Operating Range 32 to 158F
Indication L.E.D. Indicator


Ordering Information:
Sensor SpanConfiguration
ACI/ -[]-[] -[]
VAV (1) 40 to 90 R-Room
(2) 20 to 127 RS-Room w/Setpoint
RO-Room w/Override
RSO-Room w/Setpoint & Override
D-Duct-4", 8", 12",18"
I-Immersion 4", 8"

Back To Top
2004 Sentinel Power Inc. All rights reserved.
Last Updated 03/18/10